Datasheet
2009 Microchip Technology Inc. Preliminary DS41364D-page 385
PIC16F193X/LF193X
Supply Current (IDD)
(1, 2)
D013 — 140 — A1.8FOSC = 500 kHz
EC Oscillator Low-Power mode
— 317 — A3.0
D013 — 156 — A 1.8 FOSC = 500 kHz
EC Oscillator Low-Power mode (Note 5)
— 336 — A 3.0
— 384 — A 5.0
D014 — 225 375 A1.8F
OSC = 4 MHz
EC Oscillator mode
Medium Power mode
— 475 650 A3.0
D014 — 250 425 A 1.8 FOSC = 4 MHz
EC Oscillator mode (Note 5)
Medium Power mode
— 500 725 A 3.0
— 600 825 A 5.0
D015 — 3.4 — mA 3.0 F
OSC = 32 MHz
EC Oscillator High-Power mode
—4.1 — mA 3.6
D015 — 3.6 — mA 3.0 FOSC = 32 MHz
EC Oscillator High-Power mode (Note 5)
— 3.9 — mA 5.0
D016 — 7 10 A1.8F
OSC = 32 kHz
LFINTOSC mode, 85°C
—10 13A3.0
D016 — 21 35 A 1.8 FOSC = 32 kHz
LFINTOSC mode, 85°C (Note 5)
— 27 40 A 3.0
— 28 45 A 5.0
D016A — 8 13 A1.8F
OSC = 32 kHz
LFINTOSC mode, 125°C
—11 16A3.0
29.2 DC Characteristics: PIC16F/LF1933-I/E (Industrial, Extended) (Continued)
PIC16LF1933
Standard Operating Conditions (unless otherwise stated)
Operating temperature -40°C TA +85°C for industrial
-40°C T
A +125°C for extended
PIC16F1933
Standard Operating Conditions (unless otherwise stated)
Operating temperature -40°C T
A +85°C for industrial
-40°C T
A +125°C for extended
Param
No.
Device
Characteristics
Min. Typ† Max. Units
Conditions
V
DD Note
Note 1: The test conditions for all I
DD measurements in active operation mode are: OSC1 = external square wave, from
rail-to-rail; all I/O pins tri-stated, pulled to V
DD; MCLR = VDD; WDT disabled.
2: The supply current is mainly a function of the operating voltage and frequency. Other factors, such as I/O pin loading
and switching rate, oscillator type, internal code execution pattern and temperature, also have an impact on the current
consumption.
3: For RC oscillator configurations, current through R
EXT is not included. The current through the resistor can be extended
by the formula I
R = VDD/2REXT (mA) with REXT in k
4: FVR and BOR are disabled.
5: 0.1 F capacitor on V
CAP (RA0).
6: 8 MHz crystal oscillator with 4x PLL enabled.