Datasheet

 2008-2011 Microchip Technology Inc. DS41364E-page 21
PIC16(L)F1934/6/7
RD6
(4)
/CPS14/P1C/SEG19 RD6 ST CMOS General purpose I/O.
CPS14 AN — Capacitive sensing input 14.
P1C — CMOS PWM output.
SEG19 — AN LCD analog output.
RD7
(4)
/CPS15/P1D/SEG20 RD7 ST CMOS General purpose I/O.
CPS15 AN — Capacitive sensing input 15.
P1D — CMOS PWM output.
SEG20 — AN LCD analog output.
RE0
(5)
/AN5/P3A
(1)
/CCP3
(1)
/
SEG21
RE0 ST CMOS General purpose I/O.
AN5 AN — A/D Channel 5 input.
P3A — CMOS PWM output.
CCP3 ST CMOS Capture/Compare/PWM3.
SEG21 — AN LCD analog output.
RE1
(5)
/AN6/P3B/SEG22 RE1 ST CMOS General purpose I/O.
AN6 AN — A/D Channel 6 input.
P3B — CMOS PWM output.
SEG22 — AN LCD analog output.
RE2
(5)
/AN7/CCP5/SEG23 RE2 ST CMOS General purpose I/O.
AN7 AN — A/D Channel 7 input.
CCP5 ST CMOS Capture/Compare/PWM5.
SEG23 — AN LCD analog output.
RE3/MCLR
/VPP RE3 TTL — General purpose input.
MCLR
ST — Master Clear with internal pull-up.
V
PP HV — Programming voltage.
V
DD VDD Power — Positive supply.
V
SS VSS Power — Ground reference.
TABLE 1-2: PIC16(L)F1934/6/7 PINOUT DESCRIPTION (CONTINUED)
Name Function
Input
Type
Output
Type
Description
Legend: AN = Analog input or output CMOS= CMOS compatible input or output OD = Open Drain
TTL = TTL compatible input ST = Schmitt Trigger input with CMOS levels I
2
C™ = Schmitt Trigger input with I
2
C
HV = High Voltage XTAL = Crystal levels
Note 1: Pin function is selectable via the APFCON register.
2: PIC16F1934/6/7 devices only.
3: PIC16(L)F1936 devices only.
4: PORTD is available on PIC16(L)F1934/7 devices only.
5: RE<2:0> are available on PIC16(L)F1934/7 devices only.