Datasheet

 2009-2012 Microchip Technology Inc. DS80490L-page 5
PIC16(L)F1933
4. Module: Electrical Specifications
4.1 RA6/OSC2 Pin Leakage Range
The Input Leakage Currents on the RA6/OSC2 pin
are as follows:
Work around
None.
Affected Silicon Revisions
5. Module: EUSART
5.1 16-Bit High-Speed Asynchronous Mode
The EUSART provides unexpected operation
when the 16-Bit High-Speed Asynchronous mode
is selected and the Baud Rate Generator Data
Register values are loaded with zero (0). We do
not recommend using this configuration for
EUSART communication. The configuration is
shown below in the following table:
Work around
Ensure that the SPBRGH or the SPBRGL register
is loaded with a non-zero value.
Affected Silicon Revisions
Characteristic Min. Typ† Max. Units Conditions Operating Temperature
RA6/OSC2 Input Leakage
Current
—±51500nA Vss V
PIN  VDD, Pin at
High-Impedance
-40°C  TA  +85°C
RA6/OSC2 Input Leakage
Current
—±55000 nA Vss V
PIN  VDD, Pin at
High-Impedance
-40°C  TA  +125°C
A1 A2 A3 A4 A6 A7 A8
X X X
Configuration Bits BRG Data Registers
SYNC BRG16 BRGH SPBRGH Value SPBRGL Value
0 1 1 00000000 00000000
A1 A2 A3 A4 A6 A7 A8
X X XXX X X