Datasheet
2010-2012 Microchip Technology Inc. DS41440C-page 345
PIC16(L)F1825/1829
RRF Rotate Right f through Carry
Syntax: [ label ] RRF f,d
Operands: 0 f 127
d [0,1]
Operation: See description below
Status Affected: C
Description: The contents of register ‘f’ are rotated
one bit to the right through the Carry
flag. If ‘d’ is ‘0’, the result is placed in
the W register. If ‘d’ is ‘1’, the result is
placed back in register ‘f’.
SLEEP Enter Sleep mode
Syntax: [ label ]SLEEP
Operands: None
Operation: 00h WDT,
0 WDT prescaler,
1 TO
,
0 PD
Status Affected: TO, PD
Description: The power-down Status bit, PD is
cleared. Time-out Status bit, TO
is
set. Watchdog Timer and its
prescaler are cleared.
The processor is put into Sleep mode
with the oscillator stopped.
Register fC
SUBLW Subtract W from literal
Syntax: [ label ]SUBLW k
Operands: 0 k 255
Operation: k - (W) W)
Status Affected: C, DC, Z
Description: The W register is subtracted (2’s
complement method) from the eight-bit
literal ‘k’. The result is placed in the W
register.
SUBWF Subtract W from f
Syntax: [ label ] SUBWF f,d
Operands: 0 f 127
d [0,1]
Operation: (f) - (W) destination)
Status Affected: C, DC, Z
Description: Subtract (2’s complement method) W
register from register ‘f’. If ‘d’ is ‘0’, the
result is stored in the W
register. If ‘d’ is ‘1’, the result is stored
back in register ‘f.
SUBWFB Subtract W from f with Borrow
Syntax:
SUBWFB f {,d}
Operands: 0 f 127
d [0,1]
Operation: (f) – (W) – (B
) dest
Status Affected: C, DC, Z
Description: Subtract W and the BORROW flag
(CARRY) from register ‘f’ (2’s
complement method). If ‘d’ is ‘0’, the
result is stored in W. If ‘d’ is ‘1’, the
result is stored back in register ‘f’.
C = 0 W k
C = 1 W
k
DC = 0 W<3:0>
k<3:0>
DC = 1 W<3:0>
k<3:0>
C = 0 W f
C = 1 W
f
DC = 0 W<3:0>
f<3:0>
DC = 1 W<3:0>
f<3:0>