Datasheet

PIC16(L)F1825/1829
DS41440C-page 124  2010-2012 Microchip Technology Inc.
12.2.2 PORTA FUNCTIONS AND OUTPUT
PRIORITIES
Each PORTA pin is multiplexed with other functions. The
pins, their combined functions and their output priorities
are briefly described here. For additional information,
refer to the appropriate section in this data sheet.
When multiple outputs are enabled, the actual pin
control goes to the peripheral with the lowest number in
the following lists.
Analog input functions, such as ADC, comparator and
Cap Sense inputs, are not shown in the priority lists.
These inputs are active when the I/O pin is set for
Analog mode using the ANSELx registers. Digital
output functions may control the pin when it is in Analog
mode with the priority shown below.
TABLE 12-2: PORTA OUTPUT PRIORITY
Pin Name Function Priority
(1)
RA0 ICSPDAT
ICDDAT
DACOUT
RA1 ICSPCLK
ICDCLK
RX/DT
(2)
RA2 SRQ
C1OUT
CCP3
RA3 None (input only)
RA4 CLKOUT
T1OSO
CLKR
SDO1
P2B
(2)
RA5 SDO2 (PIC16(L)F1829 only)
CCP2
(2)
/P2A
(2)
Note 1: Priority listed from highest to lowest.
2: Pin function is selectable via the APFCON0 or
APFCON1 register.