Datasheet

 2010-2012 Microchip Technology Inc. DS41419D-page 353
PIC16(L)F1824/1828
30.0 ELECTRICAL SPECIFICATIONS
Absolute Maximum Ratings
(†)
Ambient temperature under bias....................................................................................................... -40°C to +125°C
Storage temperature ........................................................................................................................ -65°C to +150°C
Voltage on V
DD with respect to VSS, PIC16F1824/1828 .................................................................... -0.3V to +6.5V
Voltage on V
DD with respect to VSS, PIC16LF1824/1828 .................................................................. -0.3V to +4.0V
Voltage on MCLR
with respect to Vss ................................................................................................. -0.3V to +9.0V
Voltage on all other pins with respect to V
SS ........................................................................... -0.3V to (VDD + 0.3V)
Total power dissipation
(1)
............................................................................................................................... 800 mW
Maximum current out of V
SS pin, -40°C  TA  +85°C for industrial............................................................... 210 mA
Maximum current out of V
SS pin, -40°C  TA  +125°C for extended .............................................................. 95 mA
Maximum current into V
DD pin, -40°C  TA  +85°C for industrial.................................................................. 170 mA
Maximum current into V
DD pin, -40°C  TA  +125°C for extended ................................................................. 70 mA
Clamp current, I
K (VPIN < 0 or VPIN > VDD)20 mA
Maximum output current sunk by any I/O pin.................................................................................................... 25 mA
Maximum output current sourced by any I/O pin .............................................................................................. 25 mA
Note 1: Power dissipation is calculated as follows: P
DIS = VDD x {IDD –  IOH} +  {(VDD – VOH) x IOH} + (VOl x IOL).
† NOTICE: Stresses above those listed under “Absolute Maximum Ratings” may cause permanent damage to the
device. This is a stress rating only and functional operation of the device at those or any other conditions above those
indicated in the operation listings of this specification is not implied. Exposure to maximum rating conditions for
extended periods may affect device reliability.