Datasheet

PIC16(L)F1824/1828

DS41419D-page 210  2010-2012 Microchip Technology Inc.

R/W-0/0 R/W-0/0 R/W-1/1 R/W-0/0 R-0/0 U-0 U-0 R/W-0/0

MDEN MDOE MDSLR MDOPOL MDOUT — —MDBIT

bit 7 bit 0

Legend:

R = Readable bit W = Writable bit U = Unimplemented bit, read as ‘0’

u = Bit is unchanged x = Bit is unknown -n/n = Value at POR and BOR/Value at all other Resets

‘1’ = Bit is set ‘0’ = Bit is cleared

bit 7 MDEN: Modulator Module Enable bit

1 = Modulator module is enabled and mixing input signals

0 = Modulator module is disabled and has no output

bit 6 MDOE: Modulator Module Pin Output Enable bit

1 = Modulator pin output enabled

0 = Modulator pin output disabled

bit 5 MDSLR: MDOUT Pin Slew Rate Limiting bit

1 = MDOUT pin slew rate limiting enabled

0 = MDOUT pin slew rate limiting disabled

bit 4 MDOPOL: Modulator Output Polarity Select bit

1 = Modulator output signal is inverted

0 = Modulator output signal is not inverted

bit 3 MDOUT: Modulator Output bit

Displays the current output value of the modulator module.

(1)

bit 2-1 Unimplemented: Read as ‘0’

bit 0 MDBIT: Allows software to manually set modulation source input to module

(2)

Note 1: The modulated output frequency can be greater and asynchronous from the clock that updates this

2: MDBIT must be selected as the modulation source in the MDSRC register for this operation.