Datasheet

PIC16(L)F1826/27
DS41391D-page 346  2011 Microchip Technology Inc.
Supply Current (I
DD)
(1, 2)
D019 — 4.0
7.3
mA 3.0 FOSC = 32 MHz
HFINTOSC mode (Note 3)
—4.4
7.5
mA 3.6
D019 — 4.2
7.3
mA 3.0 FOSC = 32 MHz
HFINTOSC mode (Note 3)
— 4.6
7.5
mA 5.0
D020 — 4.0
6.0
mA 3.0 F
OSC = 32 MHz
HS Oscillator mode (Note 4)
—4.7
7.0
mA 3.6
D020 — 4.2
6.8
mA 3.0 FOSC = 32 MHz
HS Oscillator mode (Note 4)
— 4.9
7.6
mA 5.0
D021 — 410
0.65
mA 1.8 F
OSC = 4 MHz
EXTRC mode (Note 5)
— 710
1.25
mA 3.0
D021 — 430
0.695
mA 1.8 FOSC = 4 MHz
EXTRC mode (Note 5)
— 730
1.3
mA 3.0
— 860
1.35
mA 5.0
30.2 DC Characteristics: PIC16(L)F1826/27-I/E (Industrial, Extended) (Continued)
PIC16LF1826/27
Standard Operating Conditions (unless otherwise stated)
Operating temperature -40°C  TA  +85°C for industrial
-40°C  T
A  +125°C for extended
PIC16F1826/27
Standard Operating Conditions (unless otherwise stated)
Operating temperature -40°C  T
A  +85°C for industrial
-40°C  T
A  +125°C for extended
Param
No.
Device
Characteristics
Min. Typ† Max. Units
Conditions
V
DD Note
* These parameters are characterized but not tested.
† Data in “Typ” column is at 3.0V, 25°C unless otherwise stated. These parameters are for design guidance only and are not
tested.
Note 1: The test conditions for all IDD measurements in active operation mode are: OSC1 = external square wave, from
rail-to-rail; all I/O pins as inputs, pulled to V
DD; MCLR = VDD; WDT disabled.
2: The supply current is mainly a function of the operating voltage and frequency. Other factors, such as I/O pin loading
and switching rate, oscillator type, internal code execution pattern and temperature, also have an impact on the current
consumption.
3: 8 MHz internal RC oscillator with 4x PLL enabled.
4: 8 MHz crystal oscillator with 4x PLL enabled.
5: For RC oscillator configurations, current through R
EXT is not included. The current through the resistor can be extended
by the formula I
R = VDD/2REXT (mA) with REXT in k.