Datasheet

 2010-2012 Microchip Technology Inc. DS41413C-page 351
PIC12(L)F1822/PIC16(L)F1823
Power-down Base Current (IPD)
(2)
D028B — 30 50 60 A 1.8 Comparator Current, High Power
mode, one comparator enabled
(Note 1)
—31 55 70 A3.0
D028B — 60 85 90 A 1.8 Comparator Current, High Power
mode, one comparator enabled
(Note 1)
— 62 90 95 A 3.0
— 64 95 100 A 5.0
D028C — 31 51 61 A 1.8 Comparator Current, High Power
mode, two comparators enabled
—32 56 71 A3.0
D028C — 61 85 90 A 1.8 Comparator Current, High Power
mode, two comparators enabled
(Note 1)
— 63 90 95 A 3.0
— 65 95 100 A 5.0
30.3 DC Characteristics: PIC12(L)F1822/PIC16(L)F1823-I/E (Power-Down) (Continued)
PIC12LF1822/16LF1823
Standard Operating Conditions (unless otherwise stated)
Operating temperature -40°C  TA  +85°C for industrial
-40°C  T
A  +125°C for extended
PIC12F1822/16F1823
Standard Operating Conditions (unless otherwise stated)
Operating temperature -40°C  T
A  +85°C for industrial
-40°C  T
A  +125°C for extended
Param
No.
Device Characteristics Min. Typ†
Max.
+85°C
Max.
+125°C
Units
Conditions
V
DD Note
* These parameters are characterized but not tested.
† Data in “Typ” column is at 3.0V, 25°C unless otherwise stated. These parameters are for design guidance only and are
not tested.
Note 1: The peripheral current is the sum of the base I
DD or IPD and the additional current consumed when this peripheral is
enabled. The peripheral  current can be determined by subtracting the base I
DD or IPD current from this limit. Max
values should be used when calculating total current consumption.
2: The power-down current in Sleep mode does not depend on the oscillator type. Power-down current is measured with
the part in Sleep mode, with all I/O pins in high-impedance state and tied to V
DD.
3: A/D oscillator source is F
RC.