Datasheet
2011-2012 Microchip Technology Inc. Preliminary DS41579D-page 377
PIC16(L)F1782/3
30.4 DC Characteristics: PIC16(L)F1782/3-I/E
DC CHARACTERISTICS
Standard Operating Conditions (unless otherwise stated)
Operating temperature -40°C TA +85°C for industrial
-40°C
TA +125°C for extended
Param
No.
Sym. Characteristic Min. Typ† Max. Units Conditions
VIL Input Low Voltage
I/O PORT:
D034 with TTL buffer — — 0.8 V 4.5V
VDD 5.5V
D034A — — 0.15 V
DD V1.8V VDD 4.5V
D035 with Schmitt Trigger buffer — — 0.2 V
DD V2.0V VDD 5.5V
with I
2
C™ levels — — 0.3 VDD V
with SMBus levels — — 0.8 V 2.7V
VDD 5.5V
D036 MCLR
, OSC1 (RC mode)
(1)
——0.2VDD V
D036A OSC1 (HS mode) — — 0.3 V
DD V
V
IH Input High Voltage
I/O ports:
D040 with TTL buffer 2.0 — — V 4.5V
VDD 5.5V
D040A 0.25 V
DD +
0.8
——V1.8V VDD 4.5V
D041 with Schmitt Trigger buffer 0.8 V
DD ——V2.0V VDD 5.5V
with I
2
C™ levels 0.7 VDD ——V
with SMBus levels 2.1 — — V 2.7V
VDD 5.5V
D042 MCLR
0.8 VDD ——V
D043A OSC1 (HS mode) 0.7 V
DD ——V
D043B OSC1 (RC mode) 0.9 V
DD ——V(Note 1)
IIL Input Leakage Current
(2)
D060 I/O ports — ± 5
± 5
± 125
± 1000
nA
nA
VSS VPIN VDD, Pin at
high-impedance @ 85°C
125°C
D061 MCLR
(3)
—± 50± 200nAVSS VPIN VDD @ 85°C
I
PUR Weak Pull-up Current
D070* 25
25
100
140
200
300
A
V
DD = 3.3V, VPIN = VSS
VDD = 5.0V, VPIN = VSS
VOL Output Low Voltage
(4)
D080 I/O ports
——0.6V
IOL = 8mA, VDD = 5V
I
OL = 6mA, VDD = 3.3V
I
OL = 1.8mA, VDD = 1.8V
V
OH Output High Voltage
(4)
D090 I/O ports
V
DD - 0.7 — — V
I
OH = 3.5mA, VDD = 5V
I
OH = 3mA, VDD = 3.3V
I
OH = 1mA, VDD = 1.8V
* These parameters are characterized but not tested.
† Data in “Typ” column is at 3.0V, 25°C unless otherwise stated. These parameters are for design guidance only and are
not tested.
Note 1: In RC oscillator configuration, the OSC1/CLKIN pin is a Schmitt Trigger input. It is not recommended to use an external
clock in RC mode.
2: Negative current is defined as current sourced by the pin.
3: The leakage current on the MCLR pin is strongly dependent on the applied voltage level. The specified levels represent
normal operating conditions. Higher leakage current may be measured at different input voltages.
4: Including OSC2 in CLKOUT mode.