Datasheet

 2011-2012 Microchip Technology Inc. Preliminary DS41579D-page 373
PIC16(L)F1782/3
Supply Current (IDD)
(1, 2)
D014 — 125 550 A1.8FOSC = 4 MHz
EC Oscillator mode
Medium-Power mode
— 280 1100
A3.0
D014 — 220 650 A 2.3 FOSC = 4 MHz
EC Oscillator mode
(Note 5)
Medium-Power mode
— 290 1000 A 3.0
— 350 1200 A 5.0
D015 — 2.1 6.2 mA 3.0 F
OSC = 32 MHz
EC Oscillator High-Power mode
—2.57.5mA 3.6
D015 — 2.1 6.5 mA 3.0 FOSC = 32 MHz
EC Oscillator High-Power mode
(Note 5)
— 2.2 7.5 mA 5.0
30.2 DC Characteristics: PIC16(L)F1782/3-I/E (Industrial, Extended) (Continued)
PIC16LF1782/3
Standard Operating Conditions (unless otherwise stated)
Operating temperature -40°C  TA  +85°C for industrial
-40°C
 TA  +125°C for extended
PIC16F1782/3
Standard Operating Conditions (unless otherwise stated)
Operating temperature -40°C  TA  +85°C for industrial
-40°C
 TA  +125°C for extended
Param
No.
Device
Characteristics
Min. Typ† Max. Units
Conditions
V
DD Note
Note 1:
The test conditions for all IDD measurements in active operation mode are: OSC1 = external square wave, from
rail-to-rail; all I/O pins tri-stated, pulled to V
DD; MCLR = VDD; WDT disabled.
2: The supply current is mainly a function of the operating voltage and frequency. Other factors, such as I/O pin loading
and switching rate, oscillator type, internal code execution pattern and temperature, also have an impact on the current
consumption.
3: For RC oscillator configurations, current through REXT is not included. The current through the resistor can be extended
by the formula I
R = VDD/2REXT (mA) with REXT in k
4:
FVR and BOR are disabled.
5: 0.1 F capacitor on VCAP.
6: 8 MHz crystal oscillator with 4x PLL enabled.