Datasheet

PIC16(L)F1782/3
DS41579D-page 372 Preliminary  2011-2012 Microchip Technology Inc.
30.2 DC Characteristics: PIC16(L)F1782/3-I/E (Industrial, Extended)
PIC16LF1782/3
Standard Operating Conditions (unless otherwise stated)
Operating temperature -40°C  TA  +85°C for industrial
-40°C
 TA  +125°C for extended
PIC16F1782/3
Standard Operating Conditions (unless otherwise stated)
Operating temperature -40°C  TA  +85°C for industrial
-40°C
 TA  +125°C for extended
Param
No.
Device
Characteristics
Min. Typ† Max. Units
Conditions
V
DD Note
Supply Current (I
DD)
(1, 2)
D009
LDO Regulator
—75 — A — High Power mode, normal operation
—15 —
A—
Sleep VREGCON<1> =
0
—0.3 — A—
Sleep VREGCON<1> =
1
D010 — 8 16 A1.8FOSC = 32 kHz
LP Oscillator mode
(Note 4),
-40°C
 TA  +85°C
—12 20
A3.0
D010 — 18 63 A 2.3 FOSC = 32 kHz
LP Oscillator mode
(Note 4, 5),
-40°C
 TA  +85°C
— 20 74 A 3.0
— 22 79 A 5.0
D012 — 160 650
A1.8FOSC = 4 MHz
XT Oscillator mode
— 320 1000
A3.0
D012 — 260 700 A 2.3 FOSC = 4 MHz
XT Oscillator mode
(Note 5)
— 330 1100 A 3.0
— 380 1300 A 5.0
Note 1: The test conditions for all IDD measurements in active operation mode are: OSC1 = external square wave, from
rail-to-rail; all I/O pins tri-stated, pulled to V
DD; MCLR = VDD; WDT disabled.
2: The supply current is mainly a function of the operating voltage and frequency. Other factors, such as I/O pin loading
and switching rate, oscillator type, internal code execution pattern and temperature, also have an impact on the current
consumption.
3: For RC oscillator configurations, current through REXT is not included. The current through the resistor can be extended
by the formula I
R = VDD/2REXT (mA) with REXT in k
4:
FVR and BOR are disabled.
5: 0.1 F capacitor on VCAP.
6: 8 MHz crystal oscillator with 4x PLL enabled.