Datasheet

PIC16(L)F1782/3
DS41579D-page 370 Preliminary  2011-2012 Microchip Technology Inc.
30.1 DC Characteristics: PIC16(L)F1782/3-I/E (Industrial, Extended)
PIC16LF1782/3
Standard Operating Conditions (unless otherwise stated)
Operating temperature -40°C  TA  +85°C for industrial
-40°C  T
A  +125°C for extended
PIC16F1782/3
Standard Operating Conditions (unless otherwise stated)
Operating temperature -40°C  T
A  +85°C for industrial
-40°C  T
A  +125°C for extended
Param.
No.
Sym. Characteristic Min. Typ† Max. Units Conditions
D001 V
DD Supply Voltage (VDDMIN, VDDMAX)
PIC16LF1782/3 1.8
2.7
—
—
3.6
3.6
V
V
F
OSC  16 MHz:
F
OSC  32 MHz (Note 2)
D001 PIC16F1782/3 2.3
2.7
—
—
5.5
5.5
V
V
FOSC  16 MHz:
F
OSC  32 MHz (Note 2)
D002* V
DR RAM Data Retention Voltage
(1)
PIC16LF1782/3 1.5 — — V Device in Sleep mode
D002* PIC16F1782/3 1.7 — — V Device in Sleep mode
V
POR* Power-on Reset Release Voltage —1.6— V
V
PORR* Power-on Reset Rearm Voltage
PIC16LF1782/3 — 0.8 — V Device in Sleep mode
PIC16F1782/3 — 1.5 — V Device in Sleep mode
D003 V
FVR Fixed Voltage Reference Voltage -3 — 3 % 1.024V, VDD  2.5V
2.048V, V
DD  2.5V
4.096V, V
DD  4.75V (Note 4)
D004* S
VDD VDD Rise Rate to ensure internal
Power-on Reset signal
0.05 — — V/ms See Section 5.1 “Power-On Reset
(POR)” for details.
* These parameters are characterized but not tested.
† Data in “Typ” column is at 3.3V, 25°C unless otherwise stated. These parameters are for design guidance only and are not
tested.
Note 1: This is the limit to which VDD can be lowered in Sleep mode without losing RAM data.
2: PLL required for 32 MHz operation.
3: For proper operation, the minimum value of the ADC positive voltage reference must be 1.8V or greater. When selecting the
FVR or the VREF+ pin as the source of the ADC positive voltage reference, be aware that the voltage must be 1.8V or
greater.
4: Industrial temperature range only.