Datasheet

 2011-2012 Microchip Technology Inc. Preliminary DS41579D-page 277
PIC16(L)F1782/3
26.2.6 SPI OPERATION IN SLEEP MODE
In SPI Master mode, module clocks may be operating
at a different speed than when in Full-Power mode; in
the case of the Sleep mode, all clocks are halted.
Special care must be taken by the user when the MSSP
clock is much faster than the system clock.
In Slave mode, when MSSP interrupts are enabled,
after the master completes sending data, an MSSP
interrupt will wake the controller from Sleep.
If an exit from Sleep mode is not desired, MSSP
interrupts should be disabled.
In SPI Master mode, when the Sleep mode is selected,
all module clocks are halted and the transmis-
sion/reception will remain in that state until the device
wakes. After the device returns to Run mode, the
module will resume transmitting and receiving data.
In SPI Slave mode, the SPI Transmit/Receive Shift
register operates asynchronously to the device. This
allows the device to be placed in Sleep mode and data
to be shifted into the SPI Transmit/Receive Shift
register. When all 8 bits have been received, the MSSP
interrupt flag bit will be set and if enabled, will wake the
device.
TABLE 26-1: SUMMARY OF REGISTERS ASSOCIATED WITH SPI OPERATION
Name Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0
Register
on Page
ANSELA ANSA7 — ANSA5 ANSA4 ANSA3 ANSA2 ANSA1 ANSA0 123
APFCON
C2OUTSEL CCP1SEL SDOSEL SCKSEL SDISEL TXSEL RXSEL CCP2SEL
119
INTCON GIE PEIE
TMR0IE INTE IOCIE TMR0IF INTF IOCIF
84
PIE1
TMR1GIE ADIE RCIE TXIE SSP1IE CCP1IE TMR2IE TMR1IE
85
PIR1
TMR1GIF ADIF RCIF TXIF SSP1IF CCP1IF TMR2IF TMR1IF
88
SSPBUF
Synchronous Serial Port Receive Buffer/Transmit Register
271*
SSPCON1 WCOL SSPOV SSPEN CKP SSPM<3:0>
317
SSPCON3
ACKTIM PCIE SCIE BOEN SDAHT SBCDE AHEN DHEN
319
SSPSTAT SMP CKE
D/A P S R/W UA BF 315
TRISA
TRISA7 TRISA6 TRISA5 TRISA4 TRISA3 TRISA2 TRISA1 TRISA0
122
TRISC
TRISC7 TRISC6 TRISC5 TRISC4 TRISC3 TRISC2 TRISC1 TRISA0
133
Legend: — = Unimplemented location, read as ‘0’. Shaded cells are not used by the MSSP in SPI mode.
* Page provides register information.
Note 1: PIC16(L)F1783 only.