Datasheet

 2011-2012 Microchip Technology Inc. Preliminary DS41579D-page 255

PIC16(L)F1782/3

bit 1 PxSTRB: PWM Steering PSMCxB Output Enable bit

If PxMODE<3:0> =

0000 (Single-phase PWM):

1 = Single PWM output is active on pin PSMCxOUT1

0 = Single PWM output is not active on pin PSMCxOUT1. PWM drive is in inactive state

If PxMODE<3:0> =

0001 (Complementary Single-phase PWM):

1 = Complementary PWM output is active on pin PSMCxB

0 = Complementary PWM output is not active on pin PSMCxB. PWM drive is in inactive state

IF PxMODE<3:0> =

1100 (3-phase Steering):

(1)

1 = PSMCxA and PSMCxF are high. PSMCxB, PMSCxC, PSMCxD and PMSCxE are low.

0 = 3-phase output combination is not active

bit 0

PxSTRA: PWM Steering PSMCxA Output Enable bit

If PxMODE<3:0> =

000x (Single-phase PWM or Complementary PWM):

1 = Single PWM output is active on pin PSMCxA

0 = Single PWM output is not active on pin PSMCxA. PWM drive is in inactive state

IF PxMODE<3:0> =

1100 (3-phase Steering):

(1)

1 = PSMCxA and PSMCxD are high. PSMCxB, PMSCxC, PSMCxE and PMSCxF are low.

0 = 3-phase output combination is not active

Note 1: In 3-phase Steering mode, only one PSTRx bit should be set at a time. If more than one is set, then the

lowest bit number steering combination has precedence.

2: These bits are not implemented on PSMC2.