Datasheet

 2011-2012 Microchip Technology Inc. Preliminary DS41579D-page 115
PIC16(L)F1782/3
TABLE 12-3: SUMMARY OF REGISTERS ASSOCIATED WITH DATA EEPROM
REGISTER 12-6: EECON2: EEPROM CONTROL 2 REGISTER
W-0/0 W-0/0 W-0/0 W-0/0 W-0/0 W-0/0 W-0/0 W-0/0
EEPROM Control Register 2
bit 7 bit 0
Legend:
R = Readable bit W = Writable bit U = Unimplemented bit, read as ‘0’
S = Bit can only be set x = Bit is unknown -n/n = Value at POR and BOR/Value at all other Resets
‘1’ = Bit is set ‘0’ = Bit is cleared
bit 7-0 Data EEPROM Unlock Pattern bits
To unlock writes, a 55h must be written first, followed by an AAh, before setting the WR bit of the
EECON1 register. The value written to this register is used to unlock the writes. There are specific
timing requirements on these writes. Refer to Section 12.2.2 “Writing to the Data EEPROM
Memory” for more information.
Name Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0
Register on
Page
EECON1 EEPGD CFGS LWLO FREE WRERR WREN WR RD
114
EECON2 EEPROM Control Register 2 (not a physical register)
115*
EEADRL EEADRL<7:0>
113
EEADRH
—
(1)
EEADRH<6:0> 113
EEDATL EEDATL<7:0>
113
EEDATH
— — EEDATH<5:0> 113
INTCON GIE PEIE
TMR0IE INTE IOCIE TMR0IF INTF IOCIF
84
PIE2
OSFIE C2IE C1IE EEIE BCLIE — C3IE CCP2IE
86
PIR2
OSFIF C2IF C1IF EEIF BCLIF — C3IF CCP2IF
89
Legend: — = unimplemented location, read as ‘0’. Shaded cells are not used by data EEPROM module.
* Page provides register information.
2: Unimplemented, read as ‘1’.