Datasheet

 2010-2012 Microchip Technology Inc. DS41452C-page 303
PIC16(L)F1516/7/8/9
TABLE 25-9: LOW DROPOUT (LDO) REGULATOR CHARACTERISTICS
FIGURE 25-14: USART SYNCHRONOUS TRANSMISSION (MASTER/SLAVE) TIMING
TABLE 25-10: USART SYNCHRONOUS TRANSMISSION REQUIREMENTS
Standard Operating Conditions (unless otherwise stated)
Operating temperature -40°C  TA  +125°C
Param
No.
Sym. Characteristic Min. Typ† Max. Units Conditions
LDO01 LDO Regulation Voltage — 3.0 — V
LDO02 LDO External Capacitor 0.1 — 1
F
† Data in “Typ” column is at 3.0V, 25°C unless otherwise stated. These parameters are for design guidance only and are not
tested.
Standard Operating Conditions (unless otherwise stated)
Operating Temperature -40°C TA +125°C
Param.
No.
Symbol Characteristic Min. Max. Units Conditions
US120 TCKH2DTV SYNC XMIT (Master and Slave)
Clock high to data-out valid
3.0-5.5V — 80 ns
1.8-5.5V — 100 ns
US121 T
CKRF Clock out rise time and fall time
(Master mode)
3.0-5.5V — 45 ns
1.8-5.5V — 50 ns
US122 TDTRF Data-out rise time and fall time 3.0-5.5V — 45 ns
1.8-5.5V — 50 ns
Note: Refer to Figure 25-5 for load conditions.
US121
US121
US120
US122
CK
DT