Datasheet

 2010-2012 Microchip Technology Inc. DS41452C-page 111

PIC16(L)F1516/7/8/9

R/W-x/u R/W-x/u R/W-x/u R/W-x/u R/W-x/u R/W-x/u R/W-x/u R/W-x/u

LATA7 LATA6 LATA5 LATA4 LATA3 LATA2 LATA1 LATA0

bit 7 bit 0

Legend:

R = Readable bit W = Writable bit U = Unimplemented bit, read as ‘0’

u = Bit is unchanged x = Bit is unknown -n/n = Value at POR and BOR/Value at all other Resets

‘1’ = Bit is set ‘0’ = Bit is cleared

bit 7-4 LATA<7:0>: PORTA Output Latch Value bits

(1)

Note 1: Writes to PORTA are actually written to corresponding LATA register. Reads from PORTA register is the

return of actual I/O pin values.

U-0 U-0 R/W-1/1 U-0 R/W-1/1 R/W-1/1 R/W-1/1 R/W-1/1

— — ANSA5 — ANSA3 ANSA2 ANSA1 ANSA0

bit 7 bit 0

Legend:

R = Readable bit W = Writable bit U = Unimplemented bit, read as ‘0’

u = Bit is unchanged x = Bit is unknown -n/n = Value at POR and BOR/Value at all other Resets

‘1’ = Bit is set ‘0’ = Bit is cleared

bit 7-6 Unimplemented: Read as ‘0’

bit 5 ANSA5: Analog Select between Analog or Digital Function on pins RA5, respectively

0 = Digital I/O. Pin is assigned to port or digital special function.

1 = Analog input. Pin is assigned as analog input

(1)

. Digital input buffer disabled.

bit 4 Unimplemented: Read as ‘0’

bit 3-0 ANSA<3:0>: Analog Select between Analog or Digital Function on pins RA<3:0>, respectively

0 = Digital I/O. Pin is assigned to port or digital special function.

1 = Analog input. Pin is assigned as analog input

(1)

. Digital input buffer disabled.

Note 1: When setting a pin to an analog input, the corresponding TRIS bit must be set to Input mode in order to

allow external control of the voltage on the pin.