Datasheet

PIC16(L)F1516/7/8/9
DS40001452D-page 284  2010-2013 Microchip Technology Inc.
Supply Current (IDD)
(1, 2, 3)
D020 — 1.0
1.80
mA 3.0 FOSC = 20 MHz
HS Oscillator
—1.2
2.10
mA 3.6
D020 — 1.4
1.70
mA 3.0 FOSC = 20 MHz
HS Oscillator
— 1.7
2.10
mA 5.0
D021 — 150
220
A1.8FOSC = 4 MHz
EXTRC
(Note 4)
— 250
380
A3.0
D021 — 165
330
A 2.3 FOSC = 4 MHz
EXTRC
(Note 4)
— 280
420
A 3.0
— 350
500
A 5.0
25.2 DC Characteristics: Supply Current (IDD) (Continued)
PIC16LF1516/7/8/9
Standard Operating Conditions (unless otherwise stated)
Operating temperature -40°C  TA  +85°C for industrial
-40°C
 TA  +125°C for extended
PIC16F1516/7/8/9
Standard Operating Conditions (unless otherwise stated)
Operating temperature -40°C  TA  +85°C for industrial
-40°C
 TA  +125°C for extended
Param
No.
Device
Characteristics
Min. Typ† Max. Units
Conditions
V
DD Note
* These parameters are characterized but not tested.
† Data in “Typ” column is at 3.0V, 25°C unless otherwise stated. These parameters are for design guidance only and are not
tested.
Note 1: The test conditions for all IDD measurements in active operation mode are: OSC1 = external square wave, from
rail-to-rail; all I/O pins tri-stated, pulled to V
DD; MCLR = VDD; WDT disabled.
2: The supply current is mainly a function of the operating voltage and frequency. Other factors, such as I/O pin loading
and switching rate, oscillator type, internal code execution pattern and temperature, also have an impact on the current
consumption.
3: 0.1 F capacitor on VCAP pin, PIC16F1516/7/8/9 only.
4: For RC oscillator configurations, current through REXT is not included. The current through the resistor can be extended
by the formula I
R = VDD/2REXT (mA) with REXT in k.