Datasheet

 2010-2013 Microchip Technology Inc. DS40001452D-page 29
PIC16(L)F1516/7/8/9
3.3.5 CORE FUNCTION REGISTERS
SUMMARY
The Core Function registers listed in Ta ble 3-7 can be
addressed from any Bank.
TABLE 3-7: CORE FUNCTION REGISTERS SUMMARY
Addr Name Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0
Value on
POR, BOR
Value on all
other Resets
Bank 0-31
x00h or
x80h
INDF0
Addressing this location uses contents of FSR0H/FSR0L to address data memory
(not a physical register)
xxxx xxxx uuuu uuuu
x01h or
x81h
INDF1
Addressing this location uses contents of FSR1H/FSR1L to address data memory
(not a physical register)
xxxx xxxx uuuu uuuu
x02h or
x82h
PCL Program Counter (PC) Least Significant Byte 0000 0000 0000 0000
x03h or
x83h
STATUS
— — —TOPD ZDCC---1 1000 ---q quuu
x04h or
x84h
FSR0L Indirect Data Memory Address 0 Low Pointer 0000 0000 uuuu uuuu
x05h or
x85h
FSR0H Indirect Data Memory Address 0 High Pointer 0000 0000 0000 0000
x06h or
x86h
FSR1L Indirect Data Memory Address 1 Low Pointer 0000 0000 uuuu uuuu
x07h or
x87h
FSR1H Indirect Data Memory Address 1 High Pointer 0000 0000 0000 0000
x08h or
x88h
BSR
— — — BSR4 BSR3 BSR2 BSR1 BSR0 ---0 0000 ---0 0000
x09h or
x89h
WREG Working Register 0000 0000 uuuu uuuu
x0Ah or
x8Ah
PCLATH
— Write Buffer for the upper 7 bits of the Program Counter -000 0000 -000 0000
x0Bh or
x8Bh
INTCON GIE PEIE TMR0IE INTE IOCIE TMR0IF INTF IOCIF 0000 0000 0000 0000
Legend: x = unknown, u = unchanged, q = value depends on condition, - = unimplemented, read as ‘0’, r = reserved.
Shaded locations are unimplemented, read as ‘0’.