Datasheet

PIC16(L)F1516/7/8/9
DS40001452D-page 286  2010-2013 Microchip Technology Inc.
Power-down Currents (IPD)
(2, 4)
D026A* — 250 — — A 1.8 ADC Current (Note 1, 3),
conversion in progress
—250 — —
A3.0
D026A* — 280 — — A 2.3 ADC Current (Note 1, 3),
conversion in progress
— 280 — — A 3.0
— 280 — — A 5.0
25.3 DC Characteristics: Power-Down Currents (IPD) (Continued)
PIC16LF1516/7/8/9
Standard Operating Conditions (unless otherwise stated)
Operating temperature -40°C  TA  +85°C for industrial
-40°C
 TA  +125°C for extended
PIC16F1516/7/8/9
Standard Operating Conditions (unless otherwise stated)
Operating temperature -40°C  TA  +85°C for industrial
-40°C
 TA  +125°C for extended
Param
No.
Device Characteristics Min. Typ†
Max.
+85°C
Max.
+125°C
Units
Conditions
V
DD Note
* These parameters are characterized but not tested.
† Data in “Typ” column is at 3.0V, 25°C unless otherwise stated. These parameters are for design guidance only and are
not tested.
Note 1: The peripheral  current can be determined by subtracting the base IPD current from this limit. Max values should be
used when calculating total current consumption.
2: The power-down current in Sleep mode does not depend on the oscillator type. Power-down current is measured with
the part in Sleep mode, with all I/O pins in high-impedance state and tied to V
DD.
3: ADC clock source is FRC.
4: VREGPM = 1, PIC16F1516/7/8/9 only.