Datasheet

 2010-2013 Microchip Technology Inc. DS40001452D-page 135
PIC16(L)F1516/7/8/9
16.0 ANALOG-TO-DIGITAL
CONVERTER (ADC) MODULE
The Analog-to-Digital Converter (ADC) allows
conversion of an analog input signal to a 10-bit binary
representation of that signal. This device uses analog
inputs, which are multiplexed into a single sample and
hold circuit. The output of the sample and hold is
connected to the input of the converter. The converter
generates a 10-bit binary result via successive
approximation and stores the conversion result into the
ADC result registers (ADRESH:ADRESL register pair).
Figure 16-1 shows the block diagram of the ADC.
The ADC voltage reference is software selectable to be
either internally generated or externally supplied.
The ADC can generate an interrupt upon completion of
a conversion. This interrupt can be used to wake-up the
device from Sleep.
FIGURE 16-1: ADC BLOCK DIAGRAM
Note 1: When ADON = 0, all multiplexer inputs are disconnected.
2: See ADCON0 register (Register 16-1) for detailed analog channel selection per device.
VDD
VREF+
ADPREF =
10
ADPREF = 0x
FVR
FVR Buffer1
ADON
(1)
GO/DONE
VSS
ADC
00000
00001
00010
00011
CHS<4:0>
(2)
AN0
AN1
AN2
V
REF+/AN3
11111
ADRESH ADRESL
10
16
ADFM
0 = Left Justify
1 = Right Justify
Temp Indicator
11110
11011
AN27
11100
11101
Reserved
Reserved
ADPREF =
11