Datasheet

PIC16(L)F1516/7/8/9

DS40001452D-page 124  2010-2013 Microchip Technology Inc.

(2)

U-0 U-0 U-0 U-0 U-0 R/W-x/u R/W-x/u R/W-x/u

— — — — —

LATE2 LATE1 LATE0

bit 7 bit 0

Legend:

R = Readable bit W = Writable bit U = Unimplemented bit, read as ‘0’

u = Bit is unchanged x = Bit is unknown -n/n = Value at POR and BOR/Value at all other Resets

‘1’ = Bit is set ‘0’ = Bit is cleared

bit 7-3 Unimplemented: Read as ‘0’

bit 2-0 LATE<2:0>: PORTE Output Latch Value bits

(1)

Note 1: Writes to PORTE are actually written to corresponding LATE register. Reads from PORTE register is the

return of actual I/O pin values.

2: PIC16(L)F1517/9 only.

(2)

U-0 U-0 U-0 U-0 U-0 R/W-1 R/W-1 R/W-1

— — — — —

ANSE2 ANSE1 ANSE0

bit 7 bit 0

Legend:

R = Readable bit W = Writable bit U = Unimplemented bit, read as ‘0’

u = bit is unchanged x = Bit is unknown -n/n = Value at POR and BOR/Value at all other Resets

‘1’ = Bit is set ‘0’ = Bit is cleared

bit 7-3 Unimplemented: Read as ‘0’

bit 2-0 ANSE<2:0>: Analog Select between Analog or Digital Function on pins RE<2:0>, respectively

0 = Digital I/O. Pin is assigned to port or digital special function.

1 = Analog input. Pin is assigned as analog input

(1)

. Digital input buffer disabled.

Note 1: When setting a pin to an analog input, the corresponding TRIS bit must be set to Input mode in order to

allow external control of the voltage on the pin.

2: PIC16(L)F1517/9 only.