Datasheet

PIC16(L)F1516/7/8/9
DS40001452D-page 12  2010-2013 Microchip Technology Inc.
RC0/SOSCO/T1CKI RC0 ST CMOS General purpose I/O.
SOSCO — XTAL Secondary oscillator connection.
T1CKI ST — Timer1 clock input.
RC1/SOSCI/CCP2
(1)
RC1 ST CMOS General purpose I/O.
SOSCI — XTAL Secondary oscillator connection.
CCP2 ST CMOS Capture/Compare/PWM 2.
RC2/AN14/CCP1 RC2 ST CMOS General purpose I/O.
AN14 AN — ADC Channel 14 input.
CCP1 ST CMOS Capture/Compare/PWM 1.
RC3/AN15/SCK/SCL
RC3 ST CMOS General purpose I/O.
AN15 AN — ADC Channel 15 input.
SCK ST CMOS SPI clock.
SCL I
2
C™ OD I
2
C™ clock.
RC4/AN16/SDI/SDA
RC4 ST CMOS General purpose I/O.
AN16 AN — ADC Channel 16 input.
SDI ST — SPI data input.
SDA I
2
C™ OD I
2
C™ data input/output.
RC5/AN17/SDO RC5 ST CMOS General purpose I/O.
AN17 AN — ADC Channel 17 input.
SDO — CMOS SPI data output.
RC6/AN18/TX/CK
RC6 ST CMOS General purpose I/O.
AN18 AN — ADC Channel 18 input.
TX — CMOS USART asynchronous transmit.
CK ST CMOS USART synchronous clock.
RC7/AN19/RX/DT
RC7 ST CMOS General purpose I/O.
AN19 AN — ADC Channel 19 input.
RX ST — USART asynchronous input.
DT ST CMOS USART synchronous data.
RD0
(3)
/AN20 RD0 ST CMOS General purpose I/O.
AN20 AN — ADC Channel 20 input.
RD1
(3)
/AN21 RD1 ST CMOS General purpose I/O.
AN21 AN — ADC Channel 21 input.
RD2
(3)
/AN22 RD2 ST CMOS General purpose I/O.
AN22 AN — ADC Channel 22 input.
RD3
(3)
/AN23 RD3 ST CMOS General purpose I/O.
AN23 AN — ADC Channel 23 input.
RD4
(3)
/AN24 RD4 ST CMOS General purpose I/O.
AN24 AN — ADC Channel 24 input.
RD5
(3)
/AN25 RD5 ST CMOS General purpose I/O.
AN25 AN — ADC Channel 25 input.
RD6
(3)
/AN26 RD6 ST CMOS General purpose I/O.
AN26 AN — ADC Channel 26 input.
TABLE 1-2: PINOUT DESCRIPTION (CONTINUED)
Name Function
Input
Type
Output
Type
Description
Legend: AN = Analog input or output CMOS= CMOS compatible input or output OD = Open Drain
TTL = TTL compatible input ST = Schmitt Trigger input with CMOS levels I
2
C™ = Schmitt Trigger input with I
2
C
HV = High Voltage XTAL = Crystal levels
Note 1: Peripheral pin location selected using APFCON register (Register 12-1). Default location.
2: Peripheral pin location selected using APFCON register (Register 12-1). Alternate location.
3: PORTD and RE<2:0> available on PIC16(L)F1517/9 only.