Datasheet

 2012 Microchip Technology Inc. Preliminary DS41624B-page 155
PIC16(L)F1512/3
REGISTER 16-9: AADCON2: A/D CONTROL REGISTER 2
U-0 R/W-0/0 R/W-0/0 R/W-0/0 U-0 U-0 U-0 U-0
— TRIGSEL<2:0> — — — —
bit 7 bit 0
Legend:
R = Readable bit W = Writable bit U = Unimplemented bit, read as ‘0’
u = Bit is unchanged x = Bit is unknown -n/n = Value at POR and BOR/Value at all other Resets
‘1’ = Bit is set ‘0’ = Bit is cleared
bit 7
Unimplemented: Read as ‘0’
bit 6-4
TRIGSEL<2:0>: ADC Special Event Trigger Source Selection bits
111 = Reserved. Auto-conversion Trigger disabled.
110 = Reserved. Auto-conversion Trigger disabled.
101 = TMR2 Match to PR2
100 = TMR1 Overflow
011 = TMR0 Overflow
010 = CCP2
001 = CCP1
000 = No Auto Conversion Trigger Selection bits
(1,2)
bit 3-0 Unimplemented: Read as ‘0’
Note 1: This is a rising edge sensitive input for all sources.
2: Signal used to set the corresponding interrupt flag.