Information

 2012 Microchip Technology Inc. DS80543B-page 5
PIC16(L)F1512/1513
Data Sheet Clarifications
The following typographic corrections and clarifications
are to be noted for the latest version of the device data
sheet (DS41624B):
1. Module: Electrical Specifications
25.8 AC Characteristics
Outdated Freq. Tolerance range, 4% to -12%,
has been removed. In the Conditions column, V
DD
range changed from 2.0V to 1.8V for 11% to +7%.
+/-4% frequency tolerance changed to -4% to
+6%, +/-4 to -8% changed to -11% to +7%.
TABLE 25-2: OSCILLATOR PARAMETERS
Note: Corrections are shown in bold. Where
possible, the original bold text formatting
has been removed for clarity.
Standard Operating Conditions (unless otherwise stated)
Operating Temperature -40°C T
A +125°C
Param
No.
Sym. Characteristic
Freq.
Tolerance
Min. Typ† Max. Units Conditions
OS08 HF
OSC Internal Calibrated HFINTOSC
Frequency
(1)
2%
4% to +6%
11% to 7%
—
—
—
16.0
16.0
16.0
—
—
—
MHz
MHz
MHz
25°C; 3.2V
0°C  T
A  +85°C
2.3V  V
DD  5.5V
-40°C  T
A  +125°C
1.8V  V
DD  5.5V
OS09 LF
OSC Internal LFINTOSC Frequency — — 31 — kHz
OS10* T
IOSC ST HFINTOSC
Wake-up from Sleep Start-up Time — — 3 8 s
* These parameters are characterized but not tested.
† Data in “Typ” column is at 3.0V, 25°C unless otherwise stated. These parameters are for design guidance only and
are not tested.
Note 1: To ensure these oscillator frequency tolerances, V
DD and VSS must be capacitively decoupled as close to the
device as possible. 0.1 F and 0.01 F values in parallel are recommended.