Datasheet

 2011 Microchip Technology Inc. Preliminary DS41586A-page 226
PIC16(L)F1507
D019B — 8 — A1.8FOSC = 32 kHz
ECL mode
—10 —
A3.0
D019B — 10 — A 3.0 FOSC = 32 kHz
ECL mode
— 11 — A 5.0
D019C — 25 —
A1.8FOSC = 500 kHz
ECM mode
—35 —
A3.0
D019C — 35 — A 3.0 FOSC = 500 kHz
ECM mode
— 40 — A 5.0
25.2 DC Characteristics: PIC16(L)F1507-I/E (Industrial, Extended) (Continued)
PIC16LF1507
Standard Operating Conditions (unless otherwise stated)
Operating temperature -40°C  TA  +85°C for industrial
-40°C
 TA  +125°C for extended
PIC16F1507
Standard Operating Conditions (unless otherwise stated)
Operating temperature -40°C  TA  +85°C for industrial
-40°C
 TA  +125°C for extended
Param
No.
Device
Characteristics
Min. Typ† Max. Units
Conditions
V
DD Note
* These parameters are characterized but not tested.
† Data in “Typ” column is at 3.0V, 25°C unless otherwise stated. These parameters are for design guidance only and are not
tested.
Note 1: The test conditions for all IDD measurements in active operation mode are: CLKIN = external square wave, from
rail-to-rail; all I/O pins tri-stated, pulled to V
DD; MCLR = VDD; WDT disabled.
2: The supply current is mainly a function of the operating voltage and frequency. Other factors, such as I/O pin loading
and switching rate, oscillator type, internal code execution pattern and temperature, also have an impact on the current
consumption.