Datasheet

 2011 Microchip Technology Inc. Preliminary DS41607A-page 43

PIC16(L)F1503

4.5 Device ID and Revision ID

The memory location 8006h is where the Device ID and

Revision ID are stored. The upper nine bits hold the

Device ID. The lower five bits hold the Revision ID. See

Section 10.4 “User ID, Device ID and Configuration

Word Access” for more information on accessing

these memory locations.

Development tools, such as device programmers and

debuggers, may be used to read the Device ID and

Revision ID.

RRRRRR

DEV<8:3>

bit 13 bit 8

RRRRRRRR

DEV<2:0> REV<4:0>

bit 7 bit 0

Legend:

R = Readable bit W = Writable bit U = Unimplemented bit, read as ‘1’

u = Bit is unchanged x = Bit is unknown -n/n = Value at POR and BOR/Value at all other Resets

‘1’ = Bit is set ‘0’ = Bit is cleared P = Programmable bit

bit 13-5 DEV<8:0>: Device ID bits

bit 4-0 REV<4:0>: Revision ID bits

These bits are used to identify the revision (see Table under DEV<8:0> above).

Device

DEVICEID<13:0> Values

DEV<8:0> REV<4:0>

PIC16F1503 10 1100 111 x xxxx

PIC16LF1503 10 1101 101 x xxxx