Datasheet
PIC16(L)F1503
DS41607A-page 288 Preliminary 2011 Microchip Technology Inc.
28.2 DC Characteristics: PIC16(L)F1503-I/E (Industrial, Extended)
PIC16LF1503
Standard Operating Conditions (unless otherwise stated)
Operating temperature -40°C TA +85°C for industrial
-40°C
TA +125°C for extended
PIC16F1503
Standard Operating Conditions (unless otherwise stated)
Operating temperature -40°C TA +85°C for industrial
-40°C
TA +125°C for extended
Param
No.
Device
Characteristics
Min. Typ† Max. Units
Conditions
V
DD Note
Supply Current (I
DD)
(1, 2)
D013 — 25 140 A1.8FOSC = 1 MHz
EC Oscillator mode, Medium-power mode
— 45 230
A3.0
D013 — 60 180 A 2.3 FOSC = 1 MHz
EC Oscillator mode
Medium-power mode
— 80 240 A 3.0
— 100 320 A 5.0
D014 — 100 250
A1.8FOSC = 4 MHz
EC Oscillator mode,
Medium-power mode
— 180 430
A3.0
D014 — 160 275 A 2.3 FOSC = 4 MHz
EC Oscillator mode
Medium-power mode
— 210 450 A 3.0
— 260 650 A 5.0
D015 — 2.5 18
A1.8FOSC = 31 kHz
LFINTOSC mode
—4.0 20
A3.0
D015 — 14 58 A 2.3 FOSC = 31 kHz
LFINTOSC mode
— 15 65 A 3.0
— 16 70 A 5.0
D017* — 0.40 0.70 mA 1.8 F
OSC = 8 MHz
HFINTOSC mode
— 0.60 1.10 mA 3.0
D017* — 0.50 0.75 mA 2.3 FOSC = 8 MHz
HFINTOSC mode
— 0.60 1.15 mA 3.0
— 0.70 1.35 mA 5.0
D018 — 0.60 1.2 mA 1.8 F
OSC = 16 MHz
HFINTOSC mode
— 1.0 1.75 mA 3.0
D018 — 0.74 1.2 mA 2.3 FOSC = 16 MHz
HFINTOSC mode
— 0.96 1.8 mA 3.0
— 1.03 2.0 mA 5.0
D019A — 6 17
A1.8FOSC = 32 kHz
ECL mode
—8 20
A3.0
D019A — 14 25 A 3.0 FOSC = 32 kHz
ECL mode
— 15 30 A 5.0
D019B — 15 165
A1.8FOSC = 500 kHz
ECM mode
— 20 190
A3.0
* These parameters are characterized but not tested.
† Data in “Typ” column is at 3.0V, 25°C unless otherwise stated. These parameters are for design guidance only and are not
tested.
Note 1: The test conditions for all IDD measurements in active operation mode are: CLKIN = external square wave, from
rail-to-rail; all I/O pins tri-stated, pulled to V
DD; MCLR = VDD; WDT disabled.
2: The supply current is mainly a function of the operating voltage and frequency. Other factors, such as I/O pin loading
and switching rate, oscillator type, internal code execution pattern and temperature, also have an impact on the current
consumption.