Datasheet

PIC16(L)F1454/5/9
DS41639A-page 364 Preliminary  2012 Microchip Technology Inc.
29.6 USB Module Specifications
Operating Conditions-40°C  TA  +85°C (unless otherwise state)
Param
No.
Sym Characteristic Min Typ Max Units Conditions
D313 VUSB USB Voltage 3.0 — 3.6 V Voltage on VUSB3V3 pin must be
in this range for proper USB
operation
D314 I
IL Input Leakage on pin — — ± 1 AVSS VPIN VDD pin athigh
impedance
D315 V
ILUSB Input Low Voltage for USB
Buffer
——0.8VFor VUSB3V3 range
D316 VIHUSB Input High Voltage for USB
Buffer
2.0 — — V For VUSB3V3 range
D318 V
DIFS Differential Input Sensitivity — — 0.2 V The difference between D+ and
D- must exceed this value while
V
CM is met
D319 V
CM Differential Common Mode
Range
0.8 — 2.5 V
D320 Z
OUT Driver Output Impedance
(1)
28 — 44 
D321 VOL Voltage Output Low 0.0 — 0.3 V 1.5 kload connected to 3.6V
D322 V
OH Voltage Output High 2.8 — 3.6 V 1.5 kload connected to ground
Note 1: The D+ and D- signal lines have been built-in impedance matching resistors. No external resistors,
capacitors or magnetic components are necessary on the D+/D- signal paths between the
PIC16(L)F1454/5/9 family device and USB cable.