Datasheet

 2012 Microchip Technology Inc. Preliminary DS41639A-page 361
PIC16(L)F1454/5/9
D025 — 0.6 — — A 1.8 SOSC Current (Note 1)
—1.8 — — A3.0
D025 — 11 — — A 2.3 SOSC Current (Note 1)
— 13 — — A 3.0
— 19 — — A 5.0
D026 — .025 — —
A 1.8 A/D Current (Note 1, Note 3), no
conversion in progress
— .035 — —
A3.0
D026 — 10 — — A 2.3 A/D Current (Note 1, Note 3), no
conversion in progress
— 11 — — A 3.0
— 12 — — A 5.0
D026A* — 250 — —
A 1.8 A/D Current (Note 1, Note 3),
conversion in progress
—250 — —
A3.0
D026A* — 280 — — A 2.3 A/D Current (Note 1, Note 3),
conversion in progress
— 280 — — A 3.0
— 280 — — A 5.0
D027 — 7 — —
A 1.8 Comparator, Low-Power mode
(Note 1)
—8 — —A3.0
D027 — 17 — — A 2.3 Comparator, Low-Power mode
(Note 1)
— 18 — — A 3.0
— 19 — — A 5.0
29.3 DC Characteristics: PIC16(L)F1454/5/9-I/E (Power-Down) (Continued)
PIC16LF1454/5/9
Standard Operating Conditions (unless otherwise stated)
Operating temperature -40°C  TA  +85°C for industrial
-40°C
 TA  +125°C for extended
PIC16F1454/5/9
Standard Operating Conditions (unless otherwise stated)
Operating temperature -40°C  TA  +85°C for industrial
-40°C
 TA  +125°C for extended
Param
No.
Device Characteristics Min. Typ†
Max.
+85°C
Max.
+125°C
Units
Conditions
V
DD Note
* These parameters are characterized but not tested.
† Data in “Typ” column is at 3.0V, 25°C unless otherwise stated. These parameters are for design guidance only and are
not tested.
Note 1: The peripheral current is the sum of the base IDD or IPD and the additional current consumed when this peripheral is
enabled. The peripheral
 current can be determined by subtracting the base IDD or IPD current from this limit. Max
values should be used when calculating total current consumption.
2: The power-down current in Sleep mode does not depend on the oscillator type. Power-down current is measured with
the part in Sleep mode, with all I/O pins in high-impedance state and tied to V
DD.
3: A/D oscillator source is FRC.