Datasheet

 2012 Microchip Technology Inc. Preliminary DS41639A-page 305
PIC16(L)F1454/5/9
REGISTER 25-3: CWGxCON2: CWG CONTROL REGISTER 2
R/W-0/0 R/W-0/0 U-0 U-0 R/W-0/0 R/W-0/0 R/W-0/0 R/W-0/0
GxASE
GxARSE N
— —
GxASDC2 GxASDC1 GxASDFLT
—
bit 7 bit 0
Legend:
R = Readable bit W = Writable bit U = Unimplemented bit, read as ‘0’
u = Bit is unchanged x = Bit is unknown -n/n = Value at POR and BOR/Value at all other Resets
‘1’ = Bit is set ‘0’ = Bit is cleared q = Value depends on condition
bit 7 GxASE: Auto-Shutdown Event Status bit
1 = An auto-shutdown event has occurred
0 = No auto-shutdown event has occurred
bit 6
GxARSEN: Auto-Restart Enable bit
1 = Auto-restart is enabled
0 = Auto-restart is disabled
bit 5-4
Unimplemented: Read as ‘0’
bit 3
GxASDC2: CWG Auto-Shutdown on Comparator 2 Enable
1 = Shutdown when Comparator 2 output is high
0 = Comparator 2 output has no effect on shutdown
bit 2
GxASDC1: CWG Auto-Shutdown on Comparator 1 Enable
1 = Shutdown when Comparator 1 output is high
0 = Comparator 1 output has no effect on shutdown
bit 1
GxASDFLT: CWG Auto-Shutdown on FLT Enable bit
1 = Shutdown when CWG1FLT
input is low
0 =CWG1FLT
input has no effect on shutdown
bit 0
Unimplemented: Read as ‘0’