Datasheet

PIC16(L)F1454/5/9
DS41639A-page 160 Preliminary  2012 Microchip Technology Inc.
16.3 Register Definitions: ADC Control
REGISTER 16-1: ADCON0: A/D CONTROL REGISTER 0
U-0 R/W-0/0 R/W-0/0 R/W-0/0 R/W-0/0 R/W-0/0 R/W-0/0 R/W-0/0
— CHS<4:0> GO/DONE ADON
bit 7 bit 0
Legend:
R = Readable bit W = Writable bit U = Unimplemented bit, read as ‘0’
u = Bit is unchanged x = Bit is unknown -n/n = Value at POR and BOR/Value at all other Resets
‘1’ = Bit is set ‘0’ = Bit is cleared
bit 7 Unimplemented: Read as ‘0’
bit 6-2
CHS<4:0>: Analog Channel Select bits
00000 = Reserved. No channel connected.
00001 = Reserved. No channel connected.
00010 = Reserved. No channel connected.
00011 =AN3
00100 =AN4
00101 =AN5
00110 =AN6
00111 =AN7
01000 =AN8
01001 =AN9
01010 =AN10
01011 =AN11
01100 = Reserved. No channel connected.
•
•
•
11100 = Reserved. No channel connected.
11101 = Temperature Indicator
(1)
11110 = DAC (Digital-to-Analog Converter)
(2)
11111 = FVR (Fixed Voltage Reference) Buffer 1 Output
(3)
bit 1 GO/DONE: A/D Conversion Status bit
1 = A/D conversion cycle in progress. Setting this bit starts an A/D conversion cycle.
This bit is automatically cleared by hardware when the A/D conversion has completed.
0 = A/D conversion completed/not in progress
bit 0
ADON: ADC Enable bit
1 = ADC is enabled
0 = ADC is disabled and consumes no operating current
Note 1: See Section 15.0 “Temperature Indicator Module (PIC16(L)F1455/9 only)” for more information.
2: See Section 17.0 “Digital-to-Analog Converter (DAC) Module (PIC16(L)F1455/9 only)” for more infor-
mation.
3: See Section 14.0 “Fixed Voltage Reference (FVR) (PIC16(L)F1455/9 only)” for more information.