Datasheet

 1998-2013 Microchip Technology Inc. DS40182D-page 27
PIC16CE62X
TABLE 5-3: PORTB FUNCTIONS
TABLE 5-4: SUMMARY OF REGISTERS ASSOCIATED WITH PORTB
Name Bit # Buffer Type Function
RB0/INT bit0
TTL/ST
(1)
Input/output or external interrupt input. Internal software programmable
weak pull-up.
RB1 bit1 TTL Input/output pin. Internal software programmable weak pull-up.
RB2 bit2 TTL Input/output pin. Internal software programmable weak pull-up.
RB3 bit3 TTL Input/output pin. Internal software programmable weak pull-up.
RB4 bit4 TTL Input/output pin (with interrupt on change). Internal software programmable
weak pull-up.
RB5 bit5 TTL Input/output pin (with interrupt on change). Internal software programmable
weak pull-up.
RB6 bit6
TTL/ST
(2)
Input/output pin (with interrupt on change). Internal software programmable
weak pull-up. Serial programming clock pin.
RB7 bit7
TTL/ST
(2)
Input/output pin (with interrupt on change). Internal software programmable
weak pull-up. Serial programming data pin.
Legend: ST = Schmitt Trigger, TTL = TTL input
Note 1: This buffer is a Schmitt Trigger input when configured as the external interrupt.
Note 2: This buffer is a Schmitt Trigger input when used in serial programming mode.
Address Name Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0
Value on:
POR
Value on
All Other
Resets
06h PORTB RB7 RB6 RB5 RB4 RB3 RB2 RB1 RB0 xxxx xxxx uuuu uuuu
86h TRISB TRISB7 TRISB6 TRISB5 TRISB4 TRISB3 TRISB2 TRISB1 TRISB0 1111 1111 1111 1111
81h OPTION RBPU
INTEDG T0CS T0SE PSA PS2 PS1 PS0 1111 1111 1111 1111
Legend: u = unchanged, x = unknown
Note: Shaded bits are not used by PORTB.