Datasheet

 1998-2013 Microchip Technology Inc. DS40182D-page 109
PIC16CE62X
PIC16CE62X PRODUCT IDENTIFICATION SYSTEM
To order or to obtain information, e.g., on pricing or delivery, please use the listed part numbers, and refer to the factory or the listed
sales offices.
* JW Devices are UV erasable and can be programmed to any device configuration. JW Devices meet the electrical requirement of
each oscillator type.
Sales and Support
Data Sheets
Products supported by a preliminary Data Sheet may have an errata sheet describing minor operational differences and recom-
mended workarounds. To determine if an errata sheet exists for a particular device, please contact one of the following:
1. Your local Microchip sales office
2. The Microchip Worldwide Site (www.microchip.com)
Pattern: 3-Digit Pattern Code for QTP (blank otherwise)
Package: P=PDIP
SO = SOIC (Gull Wing, 300 mil body)
SS = SSOP (209 mil)
JW* = Windowed CERDIP
Temperature -=0°C to +70°C
Range: I = –40°C to +85°C
E = –40°C to +125°C
Frequency 04 = 200kHz (LP osc)
Range: 04 = 4 MHz (XT and RC osc)
20 = 20 MHz (HS osc)
Device: PIC16CE62X :V
DD range 3.0V to 5.5V
PIC16CE62XT:V
DD range 3.0V to 5.5V (Tape and Reel)
Examples:
a) PIC16CE623-04/P301 =
Commercial temp., PDIP pack-
age, 4 MHz, normal V
DD limits,
QTP pattern #301.
b) PIC16CE623-04I/SO =
Industrial temp., SOIC pack-
age, 4MHz, industrial V
DD lim-
its.
PART NO. -XX X /XX XXX