Datasheet

PIC16C9XX
DS30444E - page 20 1997 Microchip Technology Inc.
Bank 1
80h INDF Addressing this location uses contents of FSR to address data memory (not a physical register) 0000 0000 0000 0000
81h OPTION RBPU
INTEDG T0CS T0SE PSA PS2 PS1 PS0 1111 1111 1111 1111
82h PCL Program Counter's (PC) Least Significant Byte 0000 0000 0000 0000
83h STATUS IRP RP1 RP0 T
O PD Z DC C 0001 1xxx 000q quuu
84h FSR Indirect data memory address pointer xxxx xxxx uuuu uuuu
85h TRISA
PORTA Data Direction Register --11 1111 --11 1111
86h TRISB PORTB Data Direction Register 1111 1111 1111 1111
87h TRISC
PORTC Data Direction Register --11 1111 --11 1111
88h TRISD PORTD Data Direction Register 1111 1111 1111 1111
89h TRISE PORTE Data Direction Register 1111 1111 1111 1111
8Ah PCLATH
Write Buffer for the upper 5 bits of the PC ---0 0000 ---0 0000
8Bh INTCON GIE PEIE T0IE INTE RBIE T0IF INTF RBIF 0000 000x 0000 000u
8Ch PIE1 LCDIE ADIE
(2)
SSPIE CCP1IE TMR2IE TMR1IE 00-- 0000 00-- 0000
8Dh Unimplemented
8Eh PCON
POR ---- --0- ---- --u-
8Fh Unimplemented
90h Unimplemented
91h Unimplemented
92h PR2 Timer2 Period Register 1111 1111 1111 1111
93h SSPADD Synchronous Serial Port (I
2
C mode) Address Register 0000 0000 0000 0000
94h SSPSTAT SMP CKE D/A
P S R/W UA BF 0000 0000 0000 0000
95h Unimplemented
96h Unimplemented
97h Unimplemented
98h Unimplemented
99h Unimplemented
9Ah Unimplemented
9Bh Unimplemented
9Ch Unimplemented
9Dh Unimplemented
9Eh Unimplemented
9Fh
(1)
ADCON1 PCFG2 PCFG1 PCFG0 ---- -000 ---- -000
TABLE 4-1: SPECIAL FUNCTION REGISTER SUMMARY (Cont.d)
Address Name Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0
Value on
Power-on
Reset
Value on all
other resets
Legend: x = unknown, u = unchanged, q = value depends on condition, - = unimplemented read as '0',
shaded locations are unimplemented, read as ‘0’.
Note 1: Registers ADRES, ADCON0, and ADCON1 are not implemented in the PIC16C923, read as '0'.
2: These bits are reserved on the PIC16C923, always maintain these bits clear.
3: These pixels do not display, but can be used as general purpose RAM.
4: PIC16C923 reset values for PORTA: --xx xxxx for a POR, and --uu uuuu for all other resets,
PIC16C924 reset values for PORTA: --0x 0000 when read.
5: Bit1 of ADCON0 is reserved on the PIC16C924, always maintain this bit clear.