Datasheet

 1997 Microchip Technology Inc. DS30444E - page 187
PIC16C9XX
PIC16C9XX PRODUCT IDENTIFICATION SYSTEM
To order or obtain information, e.g., on pricing or delivery refer to the factory or the listed sales office.
Sales and Support
Products supported by a preliminary Data Sheet may possibly have an errata sheet describing minor operational differences and
recommended workarounds. To determine if an errata sheet exists for a particular device, please contact one of the following:
Your local Microchip sales office (see below)
The Microchip Corporate Literature Center U.S. FAX: [phone]
The Microchip’s Bulletin Board, via your local CompuServe number (CompuServe membership NOT required).
Please specify which device, revision of silicon and Data Sheet (include Literature #) you are using.
For latest version information and upgrade kits for Microchip Development Tools, please call 1-800-755-2345 or 1-602-786-7302.
1.
2.
3.
* CL Devices are UV erasable and can be programmed to any device configuration. CL Devices meet the electrical requirement of
each oscillator type (including LC devices).
Pattern: QTP, SQTP, ROM Code or Special Requirements
Package: SP = 64-pin Shrink PDIP
PT = TQFP
CL = 68-pin Windowed CERQUAD
L = PLCC
Temperature
Range:
- = 0°C to +70°C (T for Tape/Reel)
I = -40°C to +85°C (S for Tape/Reel)
Frequency
Range:
04 = 200 kHz (PIC16C9XX-04)
04 = 4 MHz
08 = 8 MHz
Device PIC16C9XX :
VDD range 4.0V to 6.0V
PIC16C9XXT :VDD range 4.0V to 6.0V (Tape/Reel)
PIC16LC9XX :VDD range 2.5V to 6.0V
PIC16LC9XT :VDD range 2.5V to 6.0V (Tape/Reel)
PART NO. -XX X /XX XXX
Examples
a) PIC16C924 - 04/P 301
Commercial Temp.,
PDIP Package, 4 MHz,
normal V
DD limits, QTP
pattern #301
b) PIC16LC923 - 04/PT
Commercial Temp.,
TQFP package, 4 MHz,
extended V
DD limits
c) PIC16C923 - 08I/CL
Industrial Temp.,
Windowed CERQUAD
package, 8 MHz, normal
V
DD limits