Datasheet

 1997 Microchip Technology Inc. DS30444E - page 161
PIC16C9XX
18.0 DC AND AC CHARACTERISTICS GRAPHS AND TABLES
The graphs and tables provided in this section are for design guidance and are not tested or guaranteed.
In some graphs or tables the data presented are outside specified operating range (i.e., outside specified V
DD
range). This is for information only and devices are guaranteed to operate properly only within the specified
range.
Note: The data presented in this section is a statistical summary of data collected on units from different lots over
a period of time and process characterization samples. 'Typical' represents the mean of the distribution at,
25°C, while 'max' or 'min' represents (mean +3σ) and (mean -3σ) respectively where σ is standard devia-
tion.
FIGURE 18-1: TYPICAL IPD vs. VDD (WDT
DISABLED, RC MODE @
25°C)
FIGURE 18-2: MAXIMUM I
PD vs. VDD (WDT
DISABLED, RC MODE -40°C
TO +85°C)
180
160
140
120
100
2.5 3.0 3.5 4.0 4.5 5.0 5.5
IPD(nA)
VDD (VOLTS)
6.0
200
220
240
260
280
1.0
0.5
0.0
2.5 3.0 3.5 4.0 4.5 5.0 5.5
IPD(µA)
VDD (VOLTS)
6.0
1.5
2.0
2.5
3.0
3.5
FIGURE 18-3: TYPICAL IPD vs. VDD (WDT
ENABLED, RC MODE @
25°C)
FIGURE 18-4: MAXIMUM I
PD vs. VDD (WDT
ENABLED, RC MODE -40°C TO
+85°C)
5.0
0.0
2.5 3.0 3.5 4.0 4.5 5.0 5.5
IPD(µA)
VDD (VOLTS)
6.0
10.0
15.0
20.0
25.0
25.0
20.0
15.0
10.0
5.0
2.5 3.0 3.5 4.0 4.5 5.0 5.5
IPD(µA)
VDD (VOLTS)
6.0
30.0
35.0
40.0
0.0