Datasheet

PIC16C77X
 1999-2013 Microchip Technology Inc. Advance Information DS30275B-page 169
FIGURE 15-12: CAPTURE/COMPARE/PWM TIMINGS (CCP1 AND CCP2)
TABLE 15-13 CAPTURE/COMPARE/PWM REQUIREMENTS (CCP1 AND CCP2)
Parameter
No.
Sym Characteristic Min Typ† Max Units Conditions
50*
TccL CCP1 and CCP2
input low time
No Prescaler 0.5T
CY + 20 — — ns
With Prescaler
PIC16C77X
10 — — ns
PIC16LC77X
20 — — ns
51* TccH
CCP1 and CCP2
input high time
No Prescaler 0.5T
CY + 20 — — ns
With Prescaler
PIC16C77X
10 — — ns
PIC16LC77X
20 — — ns
52* TccP
CCP1 and CCP2 input period
3T
CY + 40
N
— — ns N = prescale value
(1,4 or 16)
53* TccR CCP1 and CCP2 output fall time
PIC16C77X
—1025ns
PIC16LC77X
—2545ns
54* TccF CCP1 and CCP2 output fall time
PIC16C77X
—1025ns
PIC16LC77X
—2545ns
* These parameters are characterized but not tested.
† Data in "Typ" column is at 5V, 25°C unless otherwise stated. These parameters are for design guidance only and are not
tested.
Note: Refer to Figure 15-3 for load conditions.
and RC2/CCP1
(Capture Mode)
50 51
52
53 54
RC1/T1OSI/CCP2
and RC2/CCP1
(Compare or PWM Mode)
RC1/T1OSI/CCP2
774.book Page 169 Tuesday, January 29, 2013 12:02 PM