Datasheet

 1999-2013 Microchip Technology Inc. Preliminary DS41124D-page 63

PIC16C745/765

10.5.1.4 Error Interrupt Enable Register (UEIE)

The USB Error Interrupt Enable Register (UEIE) con-

tains enable bits for each of the error interrupt sources

within the USB. Setting any of these bits will enable

the respective error interrupt source in the UEIR regis-

ter.

R/W-0 R/W-0 R/W-0 R/W-0 R/W-0 R/W-0 R/W-0 R/W-0

BTS_ERR OWN_ERR WRT_ERR BTO_ERR DFN8 CRC16 CRC5 PID_ERR

R = Readable bit

W = Writable bit

U = Unimplemented bit,

read as ‘0’

-n = Value at POR reset

bit7 bit0

bit 7: BTS_ERR: Set this bit to enable BTS_ERR interrupts

1 = BTS_ERR interrupt enabled

0 = BTS_ERR interrupt disabled

bit 6: OWN_ERR: Set this bit to enable OWN_ERR interrupts

1 = OWN_ERR interrupt enabled

0 = OWN_ERR interrupt disabled

bit 5: WRT_ERR: Set this bit to enable WRT_ERR interrupts

1 = WRT_ERR interrupt enabled

0 = WRT_ERR interrupt disabled

bit 4: BTO_ERR: Set this bit to enable BTO_ERR interrupts

1 = BTO_ERR interrupt enabled

0 = BTO_ERR interrupt disabled

bit 3: DFN8: Set this bit to enable DFN8 interrupts

1 = DFN8 interrupt enabled

0 = DFN8 interrupt disabled

bit 2: CRC16: Set this bit to enable CRC16 interrupts

1 = CRC16 interrupt enabled

0 = CRC16 interrupt disabled

bit 1: CRC5: Set this bit to enable CRC5 interrupts

1 = CRC5 interrupt enabled

0 = CRC5 interrupt disabled

bit 0: PID_ERR: Set this bit to enable PID_ERR interrupts

1 = PID_ERR interrupt enabled

0 = PID_ERR interrupt disabled