Datasheet

PIC16C745/765
DS41124D-page 106 Preliminary  1999-2013 Microchip Technology Inc.
TRISD
(4)
1111 1111 1111 1111 uuuu uuuu
TRISE
(4)
0000 -111 0000 -111 uuuu -uuu
PIE1 0000 0000 0000 0000 uuuu uuuu
PIE2 ---- ---0 ---- ---0 ---- ---u
PCON
---- --0q
(3)
---- --uu ---- --uu
PR2 1111 1111 1111 1111 1111 1111
TXSTA 0000 -010 0000 -010 uuuu -uuu
SPBRG 0000 0000 0000 0000 uuuu uuuu
ADCON1 ---- -000 ---- -000 ---- -uuu
UIR --00 0000 --00 0000 --00 0000
UIE --00 0000 --00 0000 --00 0000
UEIR 0000 0000 0000 0000 0000 0000
UEIE 0000 0000 0000 0000 0000 0000
USTAT ---x xx-- ---u uu-- ---u uu--
UCTRL --x0 000- --xq qqq- --xq qqq-
UADDR -000 0000 -000 0000 -000 0000
USWSTAT 0000 0000 0000 0000 0000 0000
UEP0 ---- 0000 ---- 0000 ---- 0000
UEP1 ---- 0000 ---- 0000 ---- 0000
UEP2 ---- 0000 ---- 0000 ---- 0000
TABLE 13-7: INITIALIZATION CONDITIONS FOR ALL REGISTERS (CONTINUED)
Register
Power-on Reset
Brown-out Reset
MCLR
Resets
WDT Reset
Wake-up via WDT or
Interrupt
Legend: u = unchanged, x = unknown, - = unimplemented bit, read as '0', q = value depends on condition
Note 1: One or more bits in INTCON, PIR1 and/or PIR2 will be affected (to cause wake-up).
2: When the wake-up is due to an interrupt and the GIE bit is set, the PC is loaded with the interrupt vector
(0004h).
3: See Table 13-5 for RESET value for specific condition.
4: PIC16C765 only.