Datasheet

PIC16C7X
DS30390E-page 287  1997 Microchip Technology Inc.
PIC16C7X PRODUCT IDENTIFICATION SYSTEM
To order or obtain information, e.g., on pricing or delivery refer to the factory or the listed sales office.
* JW Devices are UV erasable and can be programmed to any device configuration. JW Devices meet the electrical requirement of
each oscillator type (including LC devices).
Sales and Support
Products supported by a preliminary Data Sheet may possibly have an errata sheet describing minor operational differences and
recommended workarounds. To determine if an errata sheet exists for a particular device, please contact one of the following:
1. The Microchip Website at www.microchip.com
2. Your local Microchip sales office (see following page)
3. The Microchip Corporate Literature Center U.S. FAX: [phone]
4. The Microchip’s Bulletin Board, via your local CompuServe number (CompuServe membership NOT required).
Please specify which device, revision of silicon and Data Sheet (include Literature #) you are using.
For latest version information and upgrade kits for Microchip Development Tools, please call 1-800-755-2345 or 1-602-786-7302.
PART NO. -XX X /XX XXX
Pattern: QTP, SQTP, Code or Special Requirements
Package: JW = Windowed CERDIP
PQ = MQFP (Metric PQFP)
TQ = TQFP (Thin Quad Flatpack)
SO = SOIC
SP = Skinny plastic dip
P = PDIP
L = PLCC
SS = SSOP
Temperature
Range:
-=0°C to +70°C
I = -40°C to +85°C
E = -40°C to +125°C
Frequency
Range:
04 = 200 kHz (PIC16C7X-04)
04 = 4 MHz
10 = 10 MHz
20 = 20 MHz
Device PIC16C7X :
VDD range 4.0V to 6.0V
PIC16C7XT :VDD range 4.0V to 6.0V (Tape/Reel)
PIC16LC7X :VDD range 2.5V to 6.0V
PIC16LC7XT :VDD range 2.5V to 6.0V (Tape/Reel)
Examples
a) PIC16C72 - 04/P 301
Commercial Temp.,
PDIP Package, 4 MHz,
normal V
DD limits, QTP
pattern #301
b) PIC16LC76 - 041/SO
Industrial Temp., SOIC
package, 4 MHz,
extended V
DD limits
c) PIC16C74A - 10E/P
Automotive Temp.,
PDIP package, 10 MHz,
normal V
DD limits