Datasheet
1998-2013 Microchip Technology Inc. Preliminary DS35008C-page 87
PIC16C62B/72A
--0.6VIOL = 7.0 mA, VDD = 4.5V,
-40C to +125C
D083 OSC2/CLKOUT
(RC osc mode)
--0.6VI
OL = 1.6 mA, VDD = 4.5V,
-40C to +85C
--0.6VI
OL = 1.2 mA, VDD = 4.5V,
-40C to +125C
Output High Voltage
D090 V
OH I/O ports (Note 3) VDD-0.7 - - V IOH = -3.0 mA, VDD = 4.5V,
-40C to +85C
V
DD-0.7 - - V IOH = -2.5 mA, VDD = 4.5V,
-40C to +125C
D092 OSC2/CLKOUT (RC osc
mode)
V
DD-0.7 - - V IOH = -1.3 mA, VDD = 4.5V,
-40C to +85C
V
DD-0.7 - - V IOH = -1.0 mA, VDD = 4.5V,
-40C to +125C
D150* V
OD Open-Drain High Voltage - - 8.5 V RA4 pin
Capacitive Loading Specs
on Output Pins
D100 C
OSC2 OSC2 pin - - 15 pF In XT, HS and LP modes when
external clock is used to drive
OSC1.
D101 CIO All I/O pins and OSC2 (in RC
mode)
--50pF
D102 Cb SCL, SDA in I
2
C mode - - 400 pF
DC CHARACTERISTICS
Standard Operating Conditions (unless otherwise stated)
Operating temperature 0°C T
A +70°C for commercial
-40°C T
A +85°C for industrial
-40°C T
A +125°C for extended
Operating voltage V
DD range as described in DC spec Section 13.1
and Section 13.2
Param
No.
Sym Characteristic Min Typ† Max Units Conditions
* These parameters are characterized but not tested.
† Data in “Typ” column is at 5V, 25C unless otherwise stated. These parameters are for design guidance only
and are not tested.
Note 1: In RC oscillator mode, the OSC1/CLKIN pin is a Schmitt Trigger input. It is not recommended that the
device be driven with external clock in RC mode.
2: The leakage current on the MCLR
/VPP pin is strongly dependent on the applied voltage level. The specified
levels represent normal operating conditions. Higher leakage current may be measured at different input volt-
ages.
3: Negative current is defined as current sourced by the pin.