Datasheet

 1999-2013 Microchip Technology Inc. DS41106C-page 85
PIC16C712/716
FIGURE 12-9: CAPTURE/COMPARE/PWM TIMINGS
TABLE 12-6: CAPTURE/COMPARE/PWM REQUIREMENTS
Param
No.
Sym. Characteristic Min Typ† Max Units Conditions
50*
TccL CCP1 input low
time
No Prescaler 0.5T
CY + 20 — — ns
With Prescaler Standard 10 — — ns
Extended (LC) 20 — — ns
51* TccH
CCP1 input high
time
No Prescaler 0.5T
CY + 20 — — ns
With Prescaler Standard 10 — — ns
Extended (LC) 20 — — ns
52* TccP
CCP1 input period
3T
CY + 40
N
— — ns N = prescale value
(1,4, or 16)
53* TccR CCP1 output rise time Standard — 10 25 ns
Extended (LC) — 25 45 ns
54* TccF CCP1 output fall time Standard — 10 25 ns
Extended (LC) — 25 45 ns
* These parameters are characterized but not tested.
† Data in “Typ” column is at 5V, 25°C unless otherwise stated. These parameters are for design guidance only and are not
tested.
Note: Refer to Figure 12-3 for load conditions.
CCP1
(Capture Mode)
50 51
52
CCP1
53
54
(Compare or PWM Mode)