Datasheet

1999-2013 Microchip Technology Inc. DS41106C-page 103
PIC16C712/716
PIC16C712/716 PRODUCT IDENTIFICATION SYSTEM
To order or obtain information, e.g., on pricing or delivery, refer to the factory or the listed sales office.
* JW Devices are UV erasable and can be programmed to any device configuration. JW Devices meet the electrical requirement of
each oscillator type (including LC devices).
Sales and Support
PART NO. -XX
X /XX XXX
PatternPackageTemperature
Range
Frequency
Range
Device
Device: PIC16C712
(1)
, PIC16C712T
(2)
;VDD range 4.0V to 5.5V
PIC16LC712
(1)
, PIC16LC712T
(2)
;VDD range 2.5V to 5.5V
PIC16C716
(1)
, PIC16C716T
(2)
;VDD range 4.0V to 5.5V
PIC16LC716
(1)
, PIC16LC716T
(2)
;VDD range 2.5V to 5.5V
Frequency Range: 04 = 4 MHz
20 = 20 MHz
Temperature
Range:
blank = 0C to 70C (Commercial)
I= -40C to +85C (Industrial)
E= -40C to +125C (Extended)
Package: JW = Windowed CERDIP
SO = SOIC
P=PDIP
SS = SSOP
Pattern: QTP, SQTP, Code or Special Requirements
(blank otherwise)
Examples:
a)
PIC16C716 – 04/P 301 = Commercial temp.,
PDIP package, 4 MHz, normal
VDD limits, QTP
pattern #301.
b) PIC16LC712 – 04I/SO = Industrial temp., SOIC
package, 200 kHz, Extended V
DD limits.
c) PIC16C712 – 20I/P = Industrial temp., PDIP
package, 20MHz, normal V
DD limits.
Note 1: C = CMOS
LC = Low Power CMOS
2: T = in tape and reel – SOIC, SSOP
packages only.
3: LC extended temperature device is not
offered.
4: LC is not offered at 20 MHz
Data Sheets
Products supported by a preliminary Data Sheet may have an errata sheet describing minor operational differences and recom-
mended workarounds. To determine if an errata sheet exists for a particular device, please contact one of the following:
1. Your local Microchip sales office
2. The Microchip Worldwide Site (www.microchip.com)