Datasheet

 1997 Microchip Technology Inc. DS30272A-page 173
PIC16C71X
PIC16C71X PRODUCT IDENTIFICATION SYSTEM
To order or obtain information, e.g., on pricing or delivery refer to the factory or the listed sales office.
* JW Devices are UV erasable and can be programmed to any device configuration. JW Devices meet the electrical requirement of
each oscillator type (including LC devices).
PART NO. -XX X /XX XXX
Pattern: QTP, SQTP, Code or Special Requirements
Package: JW = Windowed CERDIP
SO = SOIC
SP = Skinny plastic dip
P = PDIP
SS = SSOP
Temperature
Range:
- = 0°C to +70°C
I = -40°C to +85°C
E = -40°C to +125°C
Frequency
Range:
04 = 200 kHz (PIC16C7X-04)
04 = 4 MHz
10 = 10 MHz
20 = 20 MHz
Device PIC16C7X :
VDD range 4.0V to 6.0V
PIC16C7XT :VDD range 4.0V to 6.0V (Tape/Reel)
PIC16LC7X :VDD range 2.5V to 6.0V
PIC16LC7XT :VDD range 2.5V to 6.0V (Tape/Reel)
Examples
a) PIC16C71 - 04/P 301
Commercial Temp.,
PDIP Package, 4 MHz,
normal V
DD limits, QTP
pattern #301
b)
Sales and Support
Products supported by a preliminary Data Sheet may possibly have an errata sheet describing minor operational differences and
recommended workarounds. To determine if an errata sheet exists for a particular device, please contact one of the following:
Your local Microchip sales office (see below)
The Microchip Corporate Literature Center U.S. FAX: [phone]
The Microchip’s Bulletin Board, via your local CompuServe number (CompuServe membership NOT required).
Please specify which device, revision of silicon and Data Sheet (include Literature #) you are using.
For latest version information and upgrade kits for Microchip Development Tools, please call 1-800-755-2345 or 1-602-786-7302.
1.
2.
3.