Datasheet

 1997 Microchip Technology Inc. DS30272A-page 125
PIC16C71X
Applicable Devices 710 71 711 715
14.0 DC AND AC CHARACTERISTICS GRAPHS AND TABLES FOR PIC16C715
The graphs and tables provided in this section are for design guidance and are not tested or guaranteed.
In some graphs or tables the data presented are outside specified operating range (i.e., outside specified V
DD
range). This is for information only and devices are guaranteed to operate properly only within the specified
range.
FIGURE 14-1: TYPICAL IPD vs. VDD (WDT DISABLED, RC MODE)
FIGURE 14-2: MAXIMUM I
PD vs. VDD (WDT DISABLED, RC MODE)
Note: The data presented in this section is a statistical summary of data collected on units from different lots over
a period of time and matrix samples. 'Typical' represents the mean of the distribution at, 25°C, while 'max'
or 'min' represents (mean +3σ) and (mean -3σ) respectively where σ is standard deviation.
35
30
25
20
15
10
5
0
2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0
IPD(nA)
VDD(Volts)
Shaded area is beyond
recommended range.
IPD(µA)
VDD(Volts)
10.000
1.000
0.100
0.010
0.001
2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0
85°C
70°C
25°C
0°C
-40°C
Shaded area is beyond
recommended range.