Datasheet

To order or to obtain information, e.g., on pricing or delivery, please use the listed part numbers, and refer to the factory or the listed
sales offices.
* JW Devices are UV erasable and can be programmed to any device configuration. JW Devices meet the electrical requirement of
each oscillator type (including LC devices).
Sales and Support
Products supported by a preliminary Data Sheet may possibly have an errata sheet describing minor operational differences and
recommended workarounds. To determine if an errata sheet exists for a particular device, please contact one of the following:
1. The Microchip Website at www.microchip.com
2. Your local Microchip sales office (see following page)
Pattern: 3-Digit Pattern Code for QTP (blank otherwise)
Package: L=PLCC
SP = Skinny DIP
P=PDIP
SO = SOIC (Gull Wing, 300 mil body)
PQ = MQFP (Metric PQFP)
TQ = TQFP
JW* = Windowed CERDIP
SS = Shrink SOIC (Gull Wing, 300 mil body)
Temperature - = 0°C to +70°C (T for tape/reel)
Range: I = – 40°C to +85°C (S for tape/reel)
E = – 40°C to +125°C
Frequency 04 = 200 kHz (PIC16C6X-04)
Range: 04 = 4 MHz
10 = 10 MHz
20 = 20 MHz
Device: PIC16C6X :V
DD range 4.0V to 6.0V
PIC16C6XT :V
DD range 4.0V to 6.0V (Tape and Reel)
PIC16LC6X :V
DD range 2.5V to 6.0V
PIC16LC6XT :V
DD range 2.5V to 6.0V (Tape and Reel)
PIC16CR6X :V
DD range 4.0V to 6.0V
PIC16CR6XT :V
DD range 4.0V to 6.0V (Tape and Reel)
PIC16LCR6X :V
DD range 2.5V to 6.0V
PIC16LCR6XT:V
DD range 2.5V to 6.0V
PART NO. -XX X /XX XXX
Examples:
a)PIC16C62A - 04/P 301 = Commercial temp., PDIP package, 4 MHz, normal V
DD limits, QTP pattern #301
b)PIC16LC65A - 04I/PQ = Industrial temp., MQFP package, 4 MHz, extended V
DD limits
c)PIC16C67 - 10E/P = Extended temp., PDIP package, 10 MHz, normal V
DD limits
PIC16C6X
 1997-2013 Microchip Technology Inc. DS30234E-page 331
PIC16C6X Product Identification System