Datasheet

 1998-2013 Microchip Technology Inc. DS30605D-page 177
PIC16C63A/65B/73B/74B
PRODUCT IDENTIFICATION SYSTEM
To order or obtain information, e.g., on pricing or delivery, refer to the factory or the listed sales office.
* JW Devices are UV erasable and can be programmed to any device configuration. JW Devices meet the electrical requirement of
each oscillator type (including LC devices).
Sales and Support
PART NO. -XX
X /XX XXX
PatternPackageTemperature
Range
Frequency
Range
Device
Device PIC16C6X
(1)
, PIC16C6XT
(2)
; VDD range 4.0V to 5.5V
PIC16LC6X
(1)
, PIC16LC6XT
(2)
; VDD range 2.5V to 5.5V
PIC16C7X
(1)
, PIC16C7XT
(2)
; VDD range 4.0V to 5.5V
PIC16LC7X
(1)
, PIC16LC7XT
(2)
; VDD range 2.5V to 5.5V
Frequency Range 04 = 4 MHz
20 = 20 MHz
Temperature Range blank = 0°C to 70°C (Commercial)
I = -40°C to +85°C (Industrial)
E = -40°C to +125°C (Extended)
Package JW = Windowed CERDIP
PQ = MQFP (Metric PQFP)
PT = TQFP (Thin Quad Flatpack)
SO = SOIC
SP = Skinny plastic dip
P=PDIP
L=PLCC
SS = SSOP
Pattern QTP, SQTP, Code or Special Requirements
(blank otherwise)
Examples:
a)
PIC16C74B -04/P 301 = Commercial temp.,
PDIP package, 4 MHz, normal VDD limits, QTP
pattern #301.
b) PIC16LC63A - 04I/SO = Industrial temp., SOIC
package, 200 kHz, Extended V
DD limits.
c) PIC16C65B - 20I/P = Industrial temp., PDIP
package, 20 MHz, normal V
DD limits.
Note 1: C = CMOS
LC = Low Power CMOS
2: T = in tape and reel - SOIC, SSOP,
PLCC, QFP, TQ and FP
packages only.
Data Sheets
Products supported by a preliminary Data Sheet may have an errata sheet describing minor operational differences and recom-
mended workarounds. To determine if an errata sheet exists for a particular device, please contact one of the following:
1. Your local Microchip sales office
2. The Microchip Worldwide Site (www.microchip.com)