Datasheet

 1997-2013 Microchip Technology Inc. DS30234E-page 183
PIC16C6X
Applicable Devices 61 62 62A R62 63 R63 64 64A R64 65 65A R65 66 67
Capacitive Loading Specs on Output
Pins
D100 OSC2 pin C
OSC2 - - 15 pF In XT, HS and LP modes
when external clock is used to
drive OSC1.
D101 All I/O pins and OSC2 (in RC mode) C
IO - - 50 pF
D102
SCL, SDA in I
2
C mode
Cb - - 400 pF
DC CHARACTERISTICS
Standard Operating Conditions (unless otherwise stated)
Operating temperature -40°C  T
A  +85°C for industrial and
0°C  T
A  +70°C for commercial
Operating voltage V
DD range as described in DC spec Section 17.1
and Section 17.2
Param
No.
Characteristic Sym Min Typ
†
Max Units Conditions
* These parameters are characterized but not tested.
† Data in “Typ” column is at 5V, 25C unless otherwise stated. These parameters are for design guidance only and
are not tested.
Note 1: In RC oscillator configuration, the OSC1/CLKIN pin is a Schmitt Trigger input. It is not recommended that the
PIC16C6X be driven with external clock in RC mode.
2: The leakage current on the MCLR
/VPP pin is strongly dependent on the applied voltage level. The specified lev-
els represent normal operating conditions. Higher leakage current may be measured at different input voltages.
3: Negative current is defined as current sourced by the pin.